ETRI-Knowledge Sharing Plaform

ENGLISH

성과물

논문 검색
구분 SCI
연도 ~ 키워드

상세정보

학술지 Dual-Mode Dual-Bandpass Filter with Transmission Zeros Using Coupling Mode Conversion
Cited 1 time in scopus Download 0 time Share share facebook twitter linkedin kakaostory
저자
백정우, 한상민, 이태학, Y.-J. Chong, 최재익, 김영식
발행일
201202
출처
IET Microwaves, Antennas and Propagation, v.6 no.3, pp.251-262
ISSN
1751-8725
출판사
IET
DOI
https://dx.doi.org/10.1049/iet-map.2011.0031
협약과제
11PR3200, 메타 전자파 구조를 이용한 전파(RF)스펙트럼 특성 개선 기술 연구, 정영준
초록
A dual-mode dual-band bandpass filter (BPF) with a sharp skirt is proposed. The BPF uses a coupling mode conversion technique for four clear transmission zeros (TZs) at both ends of the two passbands. The inherent capacitances in this design ensure the absence of TZs at both ends of the lower passband, and exist virtually in the outer resonator because of the inner loop resonator connected to the outer resonator via a bi-interdigital coupled line. These inherent capacitances cause inductive coupling between the degenerate modes at the lower passband. In this study, a compensative perturbation patch with a value larger than the inherent capacitance is attached to the outer corner of the outer resonator in order to eliminate the effect of inherent perturbations, which indicates a conversion from inductive coupling to capacitive coupling. This study focuses on the design process and analysis using an equivalent circuit of the proposed BPF, and provides a detailed summary of the experimental results. © 2012 The Institution of Engineering and Technology.
KSP 제안 키워드
Band pass Filter(BPF), Capacitive Coupling, Coupling mode, Design process, Dual-band bandpass filter, Equivalent Circuit, Inductive Coupling(IC), Inner loop, Loop resonator, degenerate modes, dual mode