ETRI-Knowledge Sharing Plaform

ENGLISH

성과물

논문 검색
구분 SCI
연도 ~ 키워드

상세정보

학술지 Experimental Design of Mobile Satellite Antenna System for Commercial Use
Cited 14 time in scopus Download 0 time Share share facebook twitter linkedin kakaostory
저자
정영배, 엄순영, 전순익
발행일
201005
출처
IEEE Transactions on Consumer Electronics, v.56 no.2, pp.429-435
ISSN
0098-3063
출판사
IEEE
DOI
https://dx.doi.org/10.1109/TCE.2010.5505950
협약과제
09MR5300, 지능형 안테나 기술개발, 전순익
초록
This paper describes the receiver design of active phased array antenna (APAA) for mobile broadcasting and communications service via satellite. This system was optimally designed with RX-channels on the consideration of minimum size and cost besides electric performances. A dual-band and dual-polarized microstrip 8X4 array antenna was designed as a radiator. This antenna had high directivity and wide impedance bandwidth with dual-feeding structures such as the microstrip direct feeding for Band1 and the aperture coupled strip-line feeding structure for Band2. For system minimization, active channel blocks (ACBs) playing the role for signal amplification and phase control were directly combined behind the radiators with band pass filters (BPF). A beam-forming module was designed by 10:4 channel combining structure. Thus, the satellite signal power received from 10 radiators was combined into 4 channels for satellite auto tracking and signal demodulation on vehicles. Finally, to confirm the normal operations of the system, the outdoor communications test in a satellite communication environment was accomplished by the main terminal that provided satellite Internet service © 2006 IEEE.
키워드
mobile antennas, Phased arrays, satellite communications
KSP 제안 키워드
Active Phased Array Antenna, Active channel, Aperture coupled, Band pass Filter(BPF), Communication Environment, Dual-band, Dual-polarized, Experimental Design, Feeding structure, High directivity, Internet service