ETRI-Knowledge Sharing Plaform

ENGLISH

성과물

논문 검색
구분 SCI
연도 ~ 키워드

상세정보

학술지 Design Considerations for a Hyper-Redundant Pulleyless Rolling Joint with Elastic Fixtures
Cited 41 time in scopus Download 3 time Share share facebook twitter linkedin kakaostory
저자
서정욱, 김기영, 정주원, 이정주
발행일
201512
출처
IEEE/ASME Transactions on Mechatronics, v.20 no.6, pp.2841-2852
ISSN
1083-4435
출판사
IEEE, ASME
DOI
https://dx.doi.org/10.1109/TMECH.2015.2389228
협약과제
14ZC3100, 지역기반 의료기기.의료로봇 기술개발 및 의료IT 융합 중소기업 활성화 사업, 이형수
초록
Compliant joints composed of slit tubes or springs are commonly utilized for steerable endoscopes and catheters. Because this type of joint is actuated by means of its elasticity, it is difficult to bend it with a small radius of curvature. In order to overcome this problem, a hyper-redundant Pulleyless Rolling joint with Elastic Fixtures (PREF joint) is proposed. To enable miniaturization, the PREF joint does not have a pulley, and the rolling contact motion aids the actuation cables to maintain the tension. The elastic fixtures guarantee a stable rolling motion at the center of the rolling surfaces. In this paper, the fundamental characteristics for the unit and the hyper-redundant PREF joints are presented. Moreover, design considerations are proposed for the PREF joint including the rolling tooth shape, structure of the elastic fixtures, and cable actuation method. The validity of the design is verified using finite-element analysis and a 10 mm diameter prototype composed of 12 units of PREF joints for a 1 degree-of-freedom motion. As a result, the 55 mm long joint can be bent up to 짹180째 with low actuation tension. The presented guidelines will assist in the development of various steerable instruments for medical applications.
키워드
Catheter, elastic fixture (EF), endoscope, hyper-redundant joint, pulleyless rolling joint
KSP 제안 키워드
Compliant joints, Degrees of freedom(DOF), Design considerations, Fundamental characteristics, Low actuation, Medical Applications, Radius of curvature, Rolling contact, Rolling surfaces, Tooth shape, finite element analysis(FEA)