ETRI-Knowledge Sharing Plaform

ENGLISH

성과물

논문 검색
구분 SCI
연도 ~ 키워드

상세정보

학술지 Conformal Deposition of an Insulator Layer and Ag Nano Paste Filling of a through Silicon Via for a 3D Interconnection
Cited 7 time in scopus Download 2 time Share share facebook twitter linkedin kakaostory
저자
백규하, 김동표, 박건식, 함용현, 도이미, 이기준, 김경섭
발행일
201109
출처
한국물리학회, v.59 no.3, pp.2252-2258
ISSN
0374-4884
출판사
한국물리학회
DOI
https://dx.doi.org/10.3938/jkps.59.2252
초록
In this study, we reported the feasibility of filling a high-aspect-ratio through silicon via (HARTSV) with Ag nano paste for a 3D interconnection. TSVs with aspect ratios of 8:1 ~ 10:1 were fabricated in a deep reactive etching system by using the Bosch process. Then, SiO2 insulators were deposited by using various chemical vapor deposition (CVD) processes, including plasma enhanced CVD oxides, of which precursors were silane (PECVD Oxide) and tetraethoxysilane (PECVDTEOS), and sub-atmospheric CVD oxide (SACVD oxide). We succeeded in obtaining a SiO2 layer with good step coverage over 80% for all via CD sizes by using SACVD oxidation process. The thickness of SiO2 for the via top and the via bottom were in the range 158.8 ~ 161.5 nm and 162.6 ~ 170.7 nm, respectively. The HAR-TSVs were filled with Ag nano paste by using vacuum assisted paste printing. Then, the samples were cured on a hotplate at 80 °C for 2 min. The temperature was increased to 180 °C at a rate of 25 °C/min and the samples were re-annealed for 2 min. We investigated the effects for the time of evacuation/purge process and of the vacuum drying on the filling properties. A field emission scanning electron microscope (FE-SEM), X-ray microscope and focused ion beam (FIB) microscope were used to investigate the filling profile of the TSV with Ag nano pastes. By increasing the evacuation/purge time and the vacuum drying time, we could fully fill the TSV was full filled with Ag nano paste and then form a metal plug.
키워드
Ag nano paste, CVD oxidation, DRIE, FIB, TSV, X-ray microscope
KSP 제안 키워드
3D interconnection, 5 nm, Bosch process, Chemical Vapor Deposition, Conformal deposition, Filling properties, Focused ion beam, High aspect ratio, Insulator layer, Oxidation process, PECVD oxide