상세정보
학술지
Electrical and Mechanical Characterization of an Anisotropic Conductive Adhesive with a Low Melting Point Solder
- 발행일
- 200811
- 출처
- Microelectronic Engineering, v.85 no.11, pp.2202-2206
- ISSN
- 0167-9317
- 출판사
- Elsevier
- 협약과제
- 08MB3300, 차세대 ACF 소재 및 공정기술 개발, 엄용성
- 초록
- For the highly reliable interconnection in a micro-packaging technology requiring an excellent electrical and mechanical performance, the new anisotropic conductive adhesive (ACA) system with a low melting point solder was designed and characterized. An optimum flip-chip bonding cycle considering the chemo-rheological properties of a polymer matrix and solder was proposed. The bonding mechanism of the new ACA system was experimentally observed by the optical microscope. The electrical properties such as electrical resistance of about 5.6 m廓 and current density of 10,000 A/cm2 were measured by the 4-point probe test. The measured shear strength was 304 MPa after bonding process. Electrical and mechanical performances were measured and compared before and after a pressure cooker test (PCT). In order to get a more stable ACA system during processing, the polymer matrix mixed with a reductant and a low melting point solder powder will be continuously developed in the near future. © 2008 Elsevier B.V. All rights reserved.
- 키워드
- Anisotropic conductive adhesive, Electrical resistance, High reliability, Low melting point solder
- KSP 제안 키워드
- 4-Point probe, Bonding process, Electrical Resistance, Flip-chip bonding, High Reliability, Low melting point, Mechanical characterization, Mechanical performance, Optical microscope, Packaging technology, Probe test