ETRI-Knowledge Sharing Plaform

ENGLISH

성과물

논문 검색
구분 SCI
연도 ~ 키워드

상세정보

학술지 Holographic Image Generation with a Thin-Film Resonance caused by Chalcogenide Phase-change Material
Cited 50 time in scopus Download 8 time Share share facebook twitter linkedin kakaostory
저자
이승열, 김용해, 조성목, 김기현, 김태엽, 류호준, 김한나, 강한별, 황치영, 황치선
발행일
201701
출처
Scientific Reports, v.7, pp.1-8
ISSN
2045-2322
출판사
Nature Publishing Group
DOI
https://dx.doi.org/10.1038/srep41152
협약과제
16MB2200, 모바일 완전입체 단말 및 콘텐츠 기술 개발, 황치선
초록
The development of digital holography is anticipated for the viewing of 3D images by reconstructing both the amplitude and phase information of the object. Compared to analog holograms written by a laser interference, digital hologram technology has the potential to realize a moving 3D image using a spatial light modulator. However, to ensure a high-resolution 3D image with a large viewing angle, the hologram panel requires a near-wavelength scale pixel pitch with a sufficient large numbers of pixels. In this manuscript, we demonstrate a digital hologram panel based on a chalcogenide phase-change material (PCM) which has a pixel pitch of 1 μm and a panel size of 1.6 × 1.6 cm 2. A thin film of PCM encapsulated by dielectric layers can be used for the hologram panel by means of excimer laser lithography. By tuning the thicknesses of upper and lower dielectric layers, a color-selective diffraction panel is demonstrated since a thin film resonance caused by dielectric can affect to the absorption and diffraction spectrum of the proposed hologram panel. We also show reflection color of a small active region (1 μm × 4 μm) made by ultra-thin PCM layer can be electrically changed.
KSP 제안 키워드
3D Image, Digital hologram, High-resolution, Image generation, Large Viewing Angle, Large numbers, PCM layer, Phase Change Material(PCM), Spatial light modulator(SLM), Ultra-thin, active region