ETRI-Knowledge Sharing Plaform

ENGLISH

성과물

논문 검색
구분 SCI
연도 ~ 키워드

상세정보

학술지 표면 촉매 화학 반응을 이용한 크기 조절이 가능한 홀 어레이 제작
Cited - time in scopus Download 11 time Share share facebook twitter linkedin kakaostory
저자
박형주, 박정원, 이대식, 표현봉
발행일
201802
출처
센서학회지, v.27 no.1, pp.55-58
ISSN
1225-5475
출판사
한국센서학회
DOI
https://dx.doi.org/10.5369/JSST.2018.27.1.55
초록
Low-cost and large-scale fabrication method of nanohole array, which comprises nanoscale voids separated by a few tens to a few hundreds of nanometers, has opened up new possibilities in biomolecular sensing as well as novel frontier optical devices. One of the key aspects of the nanohole array research is how to control the hole size following each specific needs of the hole structure. Here, we report the extensive study on the fine control of the hole size within the range of 500?2500 nm via surface-catalyzed chemical deposition. The initial hole structures were prepared via conventional photo-lithography, and the hole size was decreased to a designed value through the surface-catalyzed chemical reduction of the gold ion on the pre- defined hole surfaces, by simple dipping of the hole array device into the aqueous solution of gold chloride and hydrox- ylamine. The final hole size was controlled by adjusting reaction time, and the optimal experimental condition was obtained by doing a series of characterization experiments. The characterization of size-controlled hole array was systematically examined on the image results of optical microscopy, field emission scanning electron microscopy(FESEM), atomic-force microscopy(AFM), and total internal reflection microscopy.
KSP 제안 키워드
Aqueous solution, Atomic force microscope(AFM), Biomolecular sensing, Chemical deposition, Chemical reduction, Designed value, Fabrication method, Fine control, Hole size, Hole structure, Key aspects