ETRI-Knowledge Sharing Plaform

ENGLISH

성과물

논문 검색
구분 SCI
연도 ~ 키워드

상세정보

학술지 Flexible Solar Cells with a Cu(In,Ga)Se2 Absorber Grown by Using a Se Thermal Cracker on a Polyimide Substrate
Cited 7 time in scopus Download 2 time Share share facebook twitter linkedin kakaostory
저자
박수정, 정용덕, 이우정, 조대형, 위재형, 한원석, 조유석, 윤종만
발행일
201501
출처
한국물리학회, v.66 no.1, pp.76-81
ISSN
0374-4884
출판사
한국물리학회
DOI
https://dx.doi.org/10.3938/jkps.66.76
협약과제
13VB6400, CIGS 박막 태양전지 구조상의 Cd-free 버퍼층에 손상을 주지 않는 TCO 증착 기술 개발, 정용덕
초록
A polyimide substrate was used for the fabrication of flexible Cu(In,Ga)Se2 (CIGS) thin-film solar cells. To deposit a stable Mo layer on a flexible substrate, we measured the residual stress in the polyimide film after the deposition of a Mo layer by varying the process pressure. A CIGS absorber was deposited on a Mo layer at a growth temperature below 500?꼦 by using a Se thermal cracker and various cracking zone temperatures (TC) to improve the reactivity of Se due to the low process temperature. To investigate the effect of Na on the efficiency of a flexible CIGS solar cell, we deposited a Mo:Na layer as a source of Na between the Mo layer and the polyimide substrate. In case of the flexible CIGS solar cell fabricated under the condition of a TC of 800?꼦 with a Mo:Na layer, the highest cell efficiency was achieved at 10.76% without an anti-reflection coating, which is significantly increased by 4% compared to the efficiency of a solar cell without the Mo:Na layer.
키워드
Cu(InGa)Se 2, Na, Polyimide, Se cracker