ETRI-Knowledge Sharing Plaform

ENGLISH

성과물

논문 검색
구분 SCI
연도 ~ 키워드

상세정보

학술지 N x N Polymer Matrix Switches Using Thermooptic Total-internal- Reflection Switch
Cited 29 time in scopus Download 0 time Share share facebook twitter linkedin kakaostory
저자
한영탁, 신장욱, 박상호, 이형종, 황월연, 박효훈, 백용순
발행일
201205
출처
Optics Express, v.20 no.12, pp.13284-13295
ISSN
1094-4087
출판사
Optical Society of America(OSA),
DOI
https://dx.doi.org/10.1364/OE.20.013284
협약과제
11MB4800, OXC(Optical Cross Connector)용 광모듈, 신장욱
초록
We have developed fully non-blocking optical matrix switches using a thermo-optic polymer 1 짹 2 total-internal-reflection (TIR) switch as a unit switching element. The TIR switch consists of crossed multimode polymer waveguides and an offset heater electrode at the switching node. The fabricated 4 짹 4 and 8 짹 8 optical matrix switch chips show excellent switching performances. The insertion losses are less than 2.5 and 4.5 dB for the 4 짹 4 and 8 짹 8 matrix switches, respectively, and their switching isolations during a turned-off state are higher than 38 dB. The switching time is about 3 ms, and the power consumption for each switching element is below 30 mW. Compact integration of the 4 짹 4 and 8 짹 8 switch chips is achieved at sizes of 25 mm 짹 4.25 mm, and 42.4 mm 짹 5 mm, respectively, through an optimization of the waveguide and heater geometries. ©2012 Optical Society of America.
KSP 제안 키워드
Matrix switch, Multimode polymer waveguides, Off-State, Power Consumption, Switching element, Switching time, Thermo-optic, insertion loss, non-blocking, polymer matrix, total internal reflection(TIR)