This study investigates the use of an alkaline earth metal precursor (MgF2) to enhance the performance of chalcogenide-based Cu(In,Ga)Se2 (CIGS) solar cells with a chemically bath deposited-Zn(O,S) (CBD-Zn(O,S)) buffer layer via post-deposited treatment (PDT). The optimal substrate temperature and layer thickness are 570 °C and 5 nm, and the light soaking (LS) treatment does not be required in this condition. The morphological properties and chemical reaction at the p-n junction of CIGS/CBD-Zn(O,S) are examined as a function of MgF2 PDT layer thickness. As the MgF2 PDT layer thickness increases, the CIGS surface becomes rough with vigorously agglomerated Cu clusters owing to the substantially high substrate temperature, which increases the incorporation of In-Se bonds and the oxygenation rate of MgF2. Density functional theory (DFT) clarifies the improved cell efficiency without the need for LS treatment (MgF2 PDT, 5 nm) by calculating the defect-related electronic behavior. The MgF2 phase effectively passivates metastable defect Cu-Se vacancy defects (VCu-Se), related to the LS effect without the additional formation of deep-level defect states into the CIGS bandgap. Moreover, VCu-Se states exert the most influence on the LS effect, and the control of defect states in the CIGS layer (not the buffer layer) is crucial for cell efficiency.
KSP Keywords
5 nm, CIGS layer, Cu clusters, Cu-Se, Deep-level defect, Electronic behavior, High substrate temperature, Layer thickness, Light soaking, Metal precursor, P-N junction
This work is distributed under the term of Creative Commons License (CCL)
(CC BY NC ND)
Copyright Policy
ETRI KSP Copyright Policy
The materials provided on this website are subject to copyrights owned by ETRI and protected by the Copyright Act. Any reproduction, modification, or distribution, in whole or in part, requires the prior explicit approval of ETRI. However, under Article 24.2 of the Copyright Act, the materials may be freely used provided the user complies with the following terms:
The materials to be used must have attached a Korea Open Government License (KOGL) Type 4 symbol, which is similar to CC-BY-NC-ND (Creative Commons Attribution Non-Commercial No Derivatives License). Users are free to use the materials only for non-commercial purposes, provided that original works are properly cited and that no alterations, modifications, or changes to such works is made. This website may contain materials for which ETRI does not hold full copyright or for which ETRI shares copyright in conjunction with other third parties. Without explicit permission, any use of such materials without KOGL indication is strictly prohibited and will constitute an infringement of the copyright of ETRI or of the relevant copyright holders.
J. Kim et. al, "Trends in Lightweight Kernel for Many core Based High-Performance Computing", Electronics and Telecommunications Trends. Vol. 32, No. 4, 2017, KOGL Type 4: Source Indication + Commercial Use Prohibition + Change Prohibition
J. Sim et.al, “the Fourth Industrial Revolution and ICT – IDX Strategy for leading the Fourth Industrial Revolution”, ETRI Insight, 2017, KOGL Type 4: Source Indication + Commercial Use Prohibition + Change Prohibition
If you have any questions or concerns about these terms of use, or if you would like to request permission to use any material on this website, please feel free to contact us
KOGL Type 4:(Source Indication + Commercial Use Prohibition+Change Prohibition)
Contact ETRI, Research Information Service Section
Privacy Policy
ETRI KSP Privacy Policy
ETRI does not collect personal information from external users who access our Knowledge Sharing Platform (KSP). Unathorized automated collection of researcher information from our platform without ETRI's consent is strictly prohibited.
[Researcher Information Disclosure] ETRI publicly shares specific researcher information related to research outcomes, including the researcher's name, department, work email, and work phone number.
※ ETRI does not share employee photographs with external users without the explicit consent of the researcher. If a researcher provides consent, their photograph may be displayed on the KSP.